Tone King's all new 12W, 1x10 Falcon channels the simplicity and grease fired glory of pure old-school guitar tone. Inspired by the rounded, burnished tones, syrupy overdrive, and chunky grit of vintage tweed and pre-tweed era amps, the Falcon is a whole new type of Tone King amp.

Output Power 12W RMS Speaker 10" Eminence Ragin Cajun
Ouptut Tubes 2x6V6GT, 3x12AX7 Preamp Single Channel (Vol, Tone, 3-Position Voicing Control)
Power Amp Push-pull, Cathode Biased, Ultralinear, No Feedback Attenuator Ironman Attenuator Built In; Precision Reactive Load; 100% Pure Transformer Load Matching; 6 Levels of Attenuation
Configuration 1x10 Combo Colors Cream/Oxblood, Brown/Cream, Black/Cream, Turquoise/White
Weight 30lbs Size 19"(w) x 16"(d) x 10"(t)

The Metropolitan is the finest amplifier ever produced by Tone King. It is an entirely new design, with an exciting new sound, driven by the warm resonance, midrange chime, and three-dimensional sound of its new speaker and cabinet design, and the enhanced sustain of its ultra-pure signal path. It also includes the breakthrough new Phase-4 output power control technology developed by Tone King, which gives you the sound of natural power tube overdrive and distortion at any power level from 0.1W to the full 40W.

Output Power 0.1W-40W Adjustable Reverb Tube-Driven, Full Size 3-Spring Pan
Output Tubes 6V6GT(x4), Cathode Biased Rectifier Tube 5AR4
Preamp Tubes 12AX7(x4), 12AT7 Speaker 1x12", Custom-Designed
Footswitch Has LED Indicators; controls chan sw & reverb Color Options Brown/White (Two-Tone), Black/White (Two-Tone)












The Imperial delivers the authentic sound of the 1950s and 1960s. It has the same raw, slightly unrefined tone and spongy feel of a genuine 40-year old vintage amp. With two preamp channels, reverb, and tremolo, the lightweight (30lbs), low power (20W) Imperial is the ideal small gigging amp.

Output Power 20W Speaker 1x12"
Ouptut Tubes 2 x 6V6 Preamp Tubes 4x12AX7, 1x12AT7
Rectifier Tube 5AR4 Preamp Channels 2 (Rhythm, Lead)
Rhythm Channel Controls Volume, Treble, Bass Lead Channel Controls Volume, Tone, Mid-Bite
Reverb Tube driven, full-size 2-spring pan Tremolo Bias modulation type
Footswitch Included; controls both channnel switching and tremolo Cabinet Dovetail jointed birch with solid pine baffle board
Weight 30lbs Dimensions 22"(w) x 10"(d) x 19"(t)
Colors turquoise/white, red/white

Output Power 0.1W-40W Adjustable Reverb 3 Spring Long Pan
Tubes 6V6GT (x4), 12AX7 (x4), 12AT7, 5AR4 Weight 32 Pounds
Footswitch Channel Switch and Reverb Colors Brown and Cream or Black and Cream












Speakers 2x12 Custom Deisgned Eminence Power Handling 120 Watts RMS
Size 29 1/2" x 18" x 12" Weight 35 Pounds
Wood Select Hardwood and Birch Plywood Colors Brown and Cream or Black and Cream
Impedance 4 Ohms

Tone King's Galaxy is the ultimate in authentic vintage tone and feel. Its 4x6L6GC output stage (cathode biased) is tweaked and voiced for chime, warmth, and a spongy, swampy, organic feel like no other Tone King amp. It is designed with an ultra-pure signal path that squeezes every last drop of tone out of its tubes.

Power Output 60W RMS Preamp Channels 2, rhythm & lead
Rhythm Channel volume, treble, bass Lead Channel volume, tone
Reverb tube driven, 2-spring long pan Tremolo bias-modulation type, footswitchable
Footswitch 2 button; controls channel selection and tremolo Output Impedance 4 or 8 ohms
Tubes 4 x 6L6GC; 4 x 12AX7; 1 x 12AT7 Output Stage Cathode biased, no negative feedback








Tone King's new Galaxy 2x12 speaker cabinet is voiced for a very chimey, present tone with incredible warmth and thickness through the middle registers, and it really packs a wallop on the bottom end. It has a very sweet and musical top end that emphasizes chime over the glassy extension into the extreme high frequencies.

Power Handling 120W RMS max Speakers 2 x Tone King '33' Custom Designed Loudspeakers
Cabinet Birch Ply

Tone King's new IRONMAN takes attenuation technology to a new level, with its precision reactive load and 100% pure transformer coupling of both load and speaker at every level of attenuation. With this technology, your amp sees the same complex load impedance at every level of attenuation. The speaker is likewise coupled to the amplifier with 100% pure transformer coupling (no resistors!) , for the most transparent and accurate coupling possible, at every level of attenuation.

Max power handing 100W RMS Input impedance 4, 8, 16 Ohms (selectable)
Output impedance 4,8,16 ohms (selectable, independent of input impedance) Attenuation Steps 15 steps (0db to -40db)
Line Out Adjustable, speaker simulated Bypass True Bypass Switch
Load Type Precision Reactive Load; models 25W G12M to within +/- 1db Power Division Pure transformer matching of load and speakerat all attenuation steps

A proud partner of Premier Builders Guild